Youth and children's basketball Tiffany blue non-slip and wear-resistant basketball
⊙Basketball maintenance
-
A. It is not advisable to touch water. Water is the natural enemy of any basketball. You need to be careful not to let the basketball get wet, and do not play in the rain. This may shorten the life of the basketball, or cause internal damage to the basketball. In addition, a wet basketball is prone to damage. Open glue.
B. Do not put heavy pressure on the basketball. Do not kick the basketball with your feet or sit on the basketball to rest. Do not press the basketball with heavy objects.
C. Do not expose it to the sun. After using the basketball, wipe the surface of the ball with a cloth. Do not wash it with water and store it in a cool and dry place.
D. Inflate correctly. Use a special air needle to moisten it and slowly insert it into the ball nozzle to inflate. It is forbidden to use a high-pressure air pump to directly inflate the No. 7 ball. The inflation pressure should be between 7-9 pounds. Do not over-inflate the basketball, as over-inflation may cause the basketball to bulge and deform. Test method: On a flat hard surface, a basketball weighing 1.8 meters (lower part of the basketball) is dropped freely. The rebound height should be between 1.2 meters and 1.4 meters (upper part of the basketball), which is normal.
E. Ungluing treatment. If the glue is unglued due to contact with water or other reasons, remember not to use 502 glue. It will cause the surface of the basketball to oxidize and harden, affecting the feel.
F Choose different series/materials of basketball wooden floor that can be used according to different venues: cowhide, PU Plastic floor: PU Cement floor: PU, rubber Sand and gravel floor: rubber Note: Outdoor PU basketball is suitable for smooth cement courts with uneven particles. For sandy and gravel floors, please choose a rubber basketball.
After G is inflated (the inflation pressure should be between 7-9 pounds) and left to stand for 24 hours, if the pressure of the basketball drops by more than 15%, it will be called a leak.
